 |
Lay the sheets out and allow one day for them to flatten out. |
 |
Clean the surface thoroughly and allow plenty of dry time. Do not use chemical cleaners! |
 |
Start at the top edge and work towards the bottom edges.
Note: If your Big Shot comes in two parts, peel the bottom section first. |
 |
If repositioning is necessary, remove gently. |
 |
After your Big Shot is in the proper position, remove any air bubbles using the enclosed squeegee. Gently work from the center of the graphic outwards. |
 |
Wipe the entire graphic with a soft, dry cloth to remove dust or residue from the application process. |
|
|
- Smooth, non-textured painted matte or gloss drywall
- Other smooth, non-textured, non-porous surfaces (glass/metal)
- Smooth non-textured wall paper
- Flat, smooth, and finished wood surfaces such as doors and paneling
- Textured wallpaper
- Textured walls (speckled, orange peel, etc.)
- Brick or concrete block
- Unpainted drywall
- Outdoor walls
- Directly applied to vehicles
- Rough, textured, uneven or porous surfaces
|
